Improved Research of Adjustable External Fixation Device for Lower Limbs Based on Semiconductor Refrigeration Sheet / 中国医疗器械杂志

A kind of adjustable external fixation device for lower extremity is designed. The circuit is mainly composed of TEC1-00703 semiconductor refrigeration chip, HZC-30A pressure sensor, STC89C52RC single chip microcomputer and other electrical components. It can realize the timing intelligent temperature control and meet the local fixed-point refrigeration. The design of adjustable structure and the application of intelligent air cushion can satisfy the full fixation of lower limbs of different individuals. Its operation does not need much medical knowledge. It can solve the problem of emergency transportation and follow-up treatment of lower limb injury in ice and snow sports. It has a good application prospect and universality.

Monitorização de células-tronco mesenquimais injetadas via retrobulbar próximas ao nervo óptico lesados de coelhos / Monitoring of stem cells from adipose tissue injected via retrobulbar next to previously injured optic nerve of rabbits

Resumo Objetivo: Verificar a presença das células-tronco mesenquimais (MSC) na área próxima ao nervo óptico de coelhos previamente lesado com álcool absoluto. Métodos: Os 12 coelhos da raça Nova Zelândia foram distribuídos em 2 lotes. Após sedação, cada olho do animal recebeu uma injeção retrobulbar de 1 ml de álcool absoluto em um dos olhos e de 1 ml de solução fisiológica 0,9% (SF) no olho contralateral. Após 15 dias deste procedimento inicial todos os olhos dos animais pertencentes ao lote A, receberam via retrobulbar, uma solução contendo MSC de tecido adiposo humano e previamente marcadas com Qdots,. Todos os olhos dos animais do lote B receberam solução PBS. Resultados: Após 15 dias desta última aplicação os animais foram sacrificados e as lâminas foram analisadas. A presença das MSC foi observada em 100% dos olhos dos animais do lote A. Conclusão: Os resultados sugerem que a marcação prévia das MSC com Qdots permitiu o acompanhamento das mesmas na região aplicada e em áreas mais internas do nervo óptico. A permanência de MSC após 15 dias de aplicação ao redor do nervo óptico sugere a viabilidade e possível participação das mesmas no processo de regeneração do tecido lesado. Nas condições deste estudo, a via de aplicação retrobulbar permitiu a mobilização das células tronco do local de aplicação até áreas centrais dos nervos ópticos nos animais do lote A, sugerindo que esta poderá ser uma via de acesso eficaz para as MSC no processo de regeneração de neuropatias ópticas.

Abstract Obtective: To verify the presence of mesenchymal stem cells (MSC) in the area close to the optic nerve of previously injured with absolute alcohol. Methods: Twelve New Zealand breed rabbits were divided into two groups, and after sedation, each eye of the animal received a retrobulbar injection of 1 ml of absolute ethanol in one eye, and 1 ml of physiological solution 0.9 % (PS) in the contralateral eye. After 15 days all eyes of animals belonging to group A, received via retrobulbar a solution containing MSCs from human adipose tissue (AT) and previously marked with Qdots, while all eyes of animals from group B received solution containing PBS. Results: The presence of MSC was observed in 100% of the eyes of the animals of group A and the more central areas near and into the optic nerve. Conclusion: The results suggest that the appointment of MSC with Qdots allowed their follow-up applied in the region and in the inner areas of the optic nerve. The MSC permanence after 15 days of application around the optic nerve suggests the feasibility and possible involvement of the same during the damaged tissue regeneration process. Under the conditions of this study, the route of retrobulbar application and the presence of the stem cells to the central areas of the optic nerves in animals of group A, suggests that this might be an effective approach for MSCs in regeneration process of optic neuropathies.

Progress in Automated Urinalysis

New technological advances have paved the way for significant progress in automated urinalysis. Quantitative reading of urinary test strips using reflectometry has become possible, while complementary metal oxide semiconductor (CMOS) technology has enhanced analytical sensitivity and shown promise in microalbuminuria testing. Microscopy-based urine particle analysis has greatly progressed over the past decades, enabling high throughput in clinical laboratories. Urinary flow cytometry is an alternative for automated microscopy, and more thorough analysis of flow cytometric data has enabled rapid differentiation of urinary microorganisms. Integration of dilution parameters (e.g., creatinine, specific gravity, and conductivity) in urine test strip readers and urine particle flow cytometers enables correction for urinary dilution, which improves result interpretation. Automated urinalysis can be used for urinary tract screening and for diagnosing and monitoring a broad variety of nephrological and urological conditions; newer applications show promising results for early detection of urothelial cancer. Concomitantly, the introduction of matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS) has enabled fast identification of urinary pathogens. Automation and workflow simplification have led to mechanical integration of test strip readers and particle analysis in urinalysis. As the information obtained by urinalysis is complex, the introduction of expert systems may further reduce analytical errors and improve the quality of sediment and test strip analysis. With the introduction of laboratory-on-a-chip approaches and the use of microfluidics, new affordable applications for quantitative urinalysis and readout on cell phones may become available. In this review, we present the main recent developments in automated urinalysis and future perspectives.

Background and Activities of the Samsung Ombudsperson Commission in Korea / 예방의학회지

OBJECTIVES: The Samsung Ombudsperson Commission was launched as an independent third-party institution following an agreement among Samsung Electronics, Supporters for Health and Right of People in Semiconductor Industry (Banolim in Korean, an independent NGO), and the Family Compensation Committee, in accordance with the industry accident prevention measure required by the settlement committee to address the issues related to employees who allegedly died from leukemia and other diseases as a result of working at Samsung's semiconductor production facilities. METHODS: The Commission has carried out a comprehensive range of activities to review and evaluate the status of the company's occupational accidents management system, as well as occupational safety and health risk management within its facilities. RESULTS: Based on the results of this review, termed a comprehensive diagnosis, the Commission presented action plans for improvement to strengthen the company's existing safety and health management system and to effectively address uncertain risks in this area going forward. CONCLUSIONS: The Commission will monitor the execution of the suggested tasks and provide advice and guidance to ensure that Samsung's semiconductor and liquid crystal display production lines are safer.

Occupational Characteristics of Semiconductor Workers with Cancer and Rare Diseases Registered with a Workers' Compensation Program in Korea

BACKGROUND: The aim of this study was to describe the types of diseases that developed in semiconductor workers who have registered with the Korea Workers' Compensation and Welfare Service (KWCWS) and to identify potential common occupational characteristics by the type of claimed disease. METHODS: A total of 55 semiconductor workers with cancer or rare diseases who claimed to the KWCWS were compared based on their work characteristics and types of claimed diseases. Leukemia, non-Hodgkin lymphoma, and aplastic anemia were grouped into lymphohematopoietic (LHP) disorder. RESULTS: Leukemia (n = 14) and breast cancer (n = 10) were the most common complaints, followed by brain cancer (n = 6), aplastic anemia (n = 6), and non-Hodgkin lymphoma (n = 4). LHP disorders (n = 24) accounted for 43%. Sixty percent (n = 33) of registered workers (n = 55) were found to have been employed before 2000. Seventy-six percent (n = 42) of registered workers and 79% (n = 19) among the registered workers with LHP (n = 24) were found to be diagnosed at a relatively young age, ≤40 years. A total of 18 workers among the registered semiconductor workers were finally determined to deserve compensation for occupational disease by either the KWCWS (n = 10) or the administrative court (n = 8). Eleven fabrication workers who were compensated responded as having handled wafers smaller than eight inches in size. Eight among the 18 workers compensated (44 %) were found to have ever worked at etching operations. CONCLUSION: The distribution of cancer and rare diseases among registered semiconductor workers was closely related to the manufacturing era before 2005, ≤8 inches of wafer size handled, exposure to clean rooms of fabrication and chip assembly operations, and etching operations.

Evaluation of Hazardous Chemicals with Material Safety Data Sheet and By-products of a Photoresist Used in the Semiconductor-Manufacturing Industry

BACKGROUND: The photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results. METHODS: A total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards. RESULTS: Forty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin. CONCLUSION: We confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.

Determining Genotypic Drug Resistance by Ion Semiconductor Sequencing With the Ion AmpliSeq™ TB Panel in Multidrug-Resistant Mycobacterium tuberculosis Isolates

BACKGROUND: We examined the feasibility of a full-length gene analysis for the drug resistance-related genes inhA, katG, rpoB, pncA, rpsL, embB, eis, and gyrA using ion semiconductor next-generation sequencing (NGS) and compared the results with those obtained from conventional phenotypic drug susceptibility testing (DST) in multidrug-resistant Mycobacterium tuberculosis (MDR-TB) isolates. METHODS: We extracted genomic DNA from 30 pure MDR-TB isolates with antibiotic susceptibility profiles confirmed by phenotypic DST for isoniazid (INH), rifampin (RIF), ethambutol (EMB), pyrazinamide (PZA), amikacin (AMK), kanamycin (KM), streptomycin (SM), and fluoroquinolones (FQs) including ofloxacin, moxifloxacin, and levofloxacin. Enriched ion spheres were loaded onto Ion PI Chip v3, with 30 samples on a chip per sequencing run, and Ion Torrent sequencing was conducted using the Ion AmpliSeq TB panel (Life Technologies, USA). RESULTS: The genotypic DST results revealed good agreement with the phenotypic DST results for EMB (Kappa 0.8), PZA (0.734), SM (0.769), and FQ (0.783). Agreements for INH, RIF, and AMK+KM were not estimated because all isolates were phenotypically resistant to INH and RIF, and all isolates were phenotypically and genotypically susceptible to AMK+KM. Moreover, 17 novel variants were identified: six (p.Gly169Ser, p.Ala256Thr, p.Ser383Pro, p.Gln439Arg, p.Tyr597Cys, p.Thr625Ala) in katG, one (p.Tyr113Phe) in inhA, five (p.Val170Phe, p.Thr400Ala, p.Met434Val, p.Glu812Gly, p.Phe971Leu) in rpoB, two (p.Tyr319Asp and p.His1002Arg) in embB, and three (p.Cys14Gly, p.Asp63Ala, p.Gly162Ser) in pncA. CONCLUSIONS: Ion semiconductor NGS could detect reported and novel amino acid changes in full coding regions of eight drug resistance-related genes. However, genotypic DST should be complemented and validated by phenotypic DSTs.

Radiopacity of contemporary luting cements using conventional and digital radiography

PURPOSE: This study evaluated the radiopacity of contemporary luting cements using conventional and digital radiography. MATERIALS AND METHODS: Disc specimens (N=24, n=6 per group, ø7 mm×1 mm) were prepared using 4 resin-based luting cements (Duolink, Multilink N, Panavia F 2.0, and U-cem). The specimens were radiographed using films, a complementary metal oxide semiconductor (CMOS) sensor, and a photostimulable phosphor plate (PSP) with a 10-step aluminum step wedge (1 mm incremental steps) and a 1-mm-thick tooth cut. The settings were 70 kVp, 4 mA, and 30 cm, with an exposure time of 0.2 s for the films and 0.1 s for the CMOS sensor and PSP. The films were scanned using a scanner. The radiopacity of the luting cements and tooth was measured using a densitometer for the film and NIH ImageJ software for the images obtained from the CMOS sensor, PSP, and scanned films. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. RESULTS: Multilink (3.44–4.33) showed the highest radiopacity, followed by U-cem (1.81–2.88), Panavia F 2.0 (1.51–2.69), and Duolink (1.48–2.59). The R² values of the optical density of the aluminum step wedge were 0.9923 for the films, 0.9989 for the PSP, 0.9986 for the scanned films, and 0.9266 for the CMOS sensor in the linear regression models. CONCLUSION: The radiopacities of the luting materials were greater than those of aluminum or dentin at the same thickness. PSP is recommended as a detector for radiopacity measurements because of its accuracy and convenience.

Analytic simulator and image generator of multiple-scattering Compton camera for prompt gamma ray imaging

For prompt gamma ray imaging for biomedical applications and environmental radiation monitoring, we propose herein a multiple-scattering Compton camera (MSCC). MSCC consists of three or more semiconductor layers with good energy resolution, and has potential for simultaneous detection and differentiation of multiple radio-isotopes based on the measured energies, as well as three-dimensional (3D) imaging of the radio-isotope distribution. In this study, we developed an analytic simulator and a 3D image generator for a MSCC, including the physical models of the radiation source emission and detection processes that can be utilized for geometry and performance prediction prior to the construction of a real system. The analytic simulator for a MSCC records coincidence detections of successive interactions in multiple detector layers. In the successive interaction processes, the emission direction of the incident gamma ray, the scattering angle, and the changed traveling path after the Compton scattering interaction in each detector, were determined by a conical surface uniform random number generator (RNG), and by a Klein-Nishina RNG. The 3D image generator has two functions: the recovery of the initial source energy spectrum and the 3D spatial distribution of the source. We evaluated the analytic simulator and image generator with two different energetic point radiation sources (Cs-137 and Co-60) and with an MSCC comprising three detector layers. The recovered initial energies of the incident radiations were well differentiated from the generated MSCC events. Correspondingly, we could obtain a multi-tracer image that combined the two differentiated images. The developed analytic simulator in this study emulated the randomness of the detection process of a multiple-scattering Compton camera, including the inherent degradation factors of the detectors, such as the limited spatial and energy resolutions. The Doppler-broadening effect owing to the momentum distribution of electrons in Compton scattering was not considered in the detection process because most interested isotopes for biomedical and environmental applications have high energies that are less sensitive to Doppler broadening. The analytic simulator and image generator for MSCC can be utilized to determine the optimal geometrical parameters, such as the distances between detectors and detector size, thus affecting the imaging performance of the Compton camera prior to the development of a real system.

Review for Retrospective Exposure Assessment Methods Used in Epidemiologic Cancer Risk Studies of Semiconductor Workers: Limitations and Recommendations

This article aims to provide a systematic review of the exposure assessment methods used to assign wafer fabrication (fab) workers in epidemiologic cohort studies of mortality from all causes and various cancers. Epidemiologic and exposure–assessment studies of silicon wafer fab operations in the semiconductor industry were collected through an extensive literature review of articles reported until 2017. The studies found various outcomes possibly linked to fab operations, but a clear association with the chemicals in the process was not found, possibly because of exposure assessment methodology. No study used a tiered assessment approach to identify similar exposure groups that incorporated manufacturing era, facility, fab environment, operation, job and level of exposure to individual hazardous agents. Further epidemiologic studies of fab workers are warranted with more refined exposure assessment methods incorporating both operation and job titleand hazardous agents to examine the associations with cancer risk or mortality.

Wearable Devices in Medical Internet of Things: Scientific Research and Commercially Available Devices / 대한의료정보학회지

OBJECTIVES: Wearable devices are currently at the heart of just about every discussion related to the Internet of Things. The requirement for self-health monitoring and preventive medicine is increasing due to the projected dramatic increase in the number of elderly people until 2020. Developed technologies are truly able to reduce the overall costs for prevention and monitoring. This is possible by constantly monitoring health indicators in various areas, and in particular, wearable devices are considered to carry this task out. These wearable devices and mobile apps now have been integrated with telemedicine and telehealth efficiently, to structure the medical Internet of Things. This paper reviews wearable health care devices both in scientific papers and commercial efforts. METHODS: MIoT is demonstrated through a defined architecture design, including hardware and software dealing with wearable devices, sensors, smart phones, medical application, and medical station analyzers for further diagnosis and data storage. RESULTS: Wearables, with the help of improved technology have been developed greatly and are considered reliable tools for long-term health monitoring systems. These are applied in the observation of a large variety of health monitoring indicators in the environment, vital signs, and fitness. CONCLUSIONS: Wearable devices are now used for a wide range of healthcare observation. One of the most important elements essential in data collection is the sensor. During recent years with improvement in semiconductor technology, sensors have made investigation of a full range of parameters closer to realization.

Repeat analysis of intraoral digital imaging performed by undergraduate students using a complementary metal oxide semiconductor sensor: An institutional case study

PURPOSE: This study was performed to quantify the repeat rate of imaging acquisitions based on different clinical examinations, and to assess the prevalence of error types in intraoral bitewing and periapical imaging using a digital complementary metal-oxide-semiconductor (CMOS) intraoral sensor. MATERIALS AND METHODS: A total of 8,030 intraoral images were retrospectively collected from 3 groups of undergraduate clinical dental students. The type of examination, stage of the procedure, and reasons for repetition were analysed and recorded. The repeat rate was calculated as the total number of repeated images divided by the total number of examinations. The weighted Cohen's kappa for inter- and intra-observer agreement was used after calibration and prior to image analysis. RESULTS: The overall repeat rate on intraoral periapical images was 34.4%. A total of 1,978 repeated periapical images were from endodontic assessment, which included working length estimation (WLE), trial gutta-percha (tGP), obturation, and removal of gutta-percha (rGP). In the endodontic imaging, the highest repeat rate was from WLE (51.9%) followed by tGP (48.5%), obturation (42.2%), and rGP (35.6%). In bitewing images, the repeat rate was 15.1% and poor angulation was identified as the most common cause of error. A substantial level of intra- and interobserver agreement was achieved. CONCLUSION: The repeat rates in this study were relatively high, especially for certain clinical procedures, warranting training in optimization techniques and radiation protection. Repeat analysis should be performed from time to time to enhance quality assurance and hence deliver high-quality health services to patients.

The relationship between spontaneous abortion and female workers in the semiconductor industry

BACKGROUND: This study investigated the relationship between job type and the risk for spontaneous abortion to assess the reproductive toxicity of female workers in the semiconductor industry. METHODS: A questionnaire survey was administered to current female workers of two semiconductor manufacturing plants in Korea. We included female workers who became pregnant at least 6 months after the start of their employment with the company. The pregnancy outcomes of 2,242 female workers who experienced 4,037 pregnancies were investigated. Personnel records were used to assign the subjects to one of three groups: fabrication process workers, packaging process workers, and clerical workers. To adjust for within-person correlations between pregnancies, a generalized estimating equation was used. The logistic regression analysis was limited to the first pregnancy after joining the company to satisfy the assumption of independence among pregnancies. Moreover, we stratified the analysis by time period (pregnancy in the years prior to 2008 vs. after 2009) to reflect differences in occupational exposure based on semiconductor production periods. RESULTS: The risk for spontaneous abortion in female semiconductor workers was not significantly higher for fabrication and packaging process workers than for clerical workers. However, when we stratified by time period, the odds ratio for spontaneous abortion was significantly higher for packaging process workers who became pregnant prior to 2008 when compared with clerical workers (odds ratio: 2.21; 95% confidence interval: 1.01–4.81). CONCLUSIONS: When examining the pregnancies of female semiconductor workers that occurred prior to 2008, packaging process workers showed a significantly higher risk for spontaneous abortions than did clerical workers. The two semiconductor production periods in our study (prior to 2008 vs. after 2009) had different automated processes, chemical exposure levels, and working environments. Thus, the conditions prior to 2008 may have increased the risk for spontaneous abortions in packaging process workers in the semiconductor industry. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1186/s40557-017-0204-x) contains supplementary material, which is available to authorized users.

Dados Preliminares do Valor Prognóstico de um Novo Protocolo deCintilografia Miocárdica Ultrarrápido e com Menos Radiação emGamacâmara CZT / Preliminary Data on the Prognostic Value of a New Protocol of Ultra-fast Myocardial Scintigraphy with Less Radiation in CZT Gamma Camera

A cintilografia miocárdica de perfusão (CMP) é um dos métodos mais utilizados na avaliação de pacientes com suspeita de coronariopatia por seu valor diagnóstico e prognóstico. Duas de suas maiores limitações são o uso de radiação e a duração prolongada dosexames. Entretanto, novas Gamacâmaras de CZT (GC-CZT) têm permitido reduzir as doses dos radiotraçadores empregadas e o tempo de aquisição. O valor prognóstico desses novos protocolos não é conhecido.Objetivo: Determinar o valor prognóstico de um novo protocolo de CMP ultrarrápido e de baixa radiação numa GC-CZT. População: Pacientes com suspeita de coronariopatia consecutivamente submetidos a CMP numa GC-CZT no período de novembro de 2011 a junho de 2012.Metodologia: Foi utilizado protocolo de mesmo dia, iniciado pela fase de repouso com dose de 5 mCi e posterior estresse com dose de 15 mCi de Tc-99m sestamibi. Os tempos de aquisição foram de 6 e 3 minutos, respectivamente. Os exames foram classificados como normais ou anormais e escores de perfusão (SSS, SRS e SDS) foram calculados. Pacientes foram acompanhados mediante contato telefônico semestral. Os eventos avaliados foram morte, infarto não fatal e revascularização tardia (> 60 dias após CMP). Foi utilizado método de Coxpara identificar os preditores.Resultados: Setecentos e noventa e dois pacientes foram acompanhados por 21,3 ± 3,7 meses. A idade média foi de 65,2 ± 12,7 anos, sendo 50,3% do sexo masculino e o IMC médio de 26,9 ± 4,7. Hipertensão arterial foi o fator de risco mais frequente (59,5%), seguidode dislipidemia (51,9%) e diabetes (23,3%). Estresse físico foi empregado em 438 (55,3%) pacientes; 618 (78%) CMP foram normais. A dosimetria média dos exames foi 6 mSv e a duração média, de 48 ± 11 minutos. Durante o seguimentos ocorreram 12 óbitos, 4 infartos não fatais...

Myocardial perfusion scintigraphy (MPS) is one of the most used imaging methods for the evaluation of patients for coronary artery disease (CAD) due to its diagnostic and prognostic value. Two of its main limitations are radiation use and scan duration. However, CZT cameras (CZT-C) have allowed tracer dose and scan time reductions. However, the prognostic value of these new protocols is not known. Objective: To determine the prognostic value of a new, ultrafast, low dose protocol in a CZT-C. Population: Patients with suspect CAD undergoing MPS from 11/2011 to 6/2012 were studied. Methods: They had a 1-day Tc-99m sestamibi protocol starting with rest study (5 mCi dose) followed by stress (15 mCi). Acquisition times were 6 and 3 minutes respectively. MPS studied were classified as normal or abnormal and perfusion scores (SSS, SRS and SDS) were calculated. Patients were accompanied by 6-month phone calls. Events were defined as death, nonfatal myocardial infarction and late revascularization (> 60 days after MPS) and analyzed with the Cox method.Results: 792 patients were followed for 21.3 ± 3.7 months. Age was 65.2 ± 12.7 years, 50.3% were male and body mass index was 26.9 ± 4.7. Hypertension was the most frequent risk factor (59.5%), followed by hypercholesterolemia (51.9%) and diabetes (23.3%). Exercise was used in 438 (55.3%); 618 (78%) MPS studies were normal. Mean dosimetry was 6 mSv and mean scan time, 48 ± 11 minutes. During follow-up, there were 12 deaths...

Evaluación de los efectos del LED en el tejido dérmico de ratones / The effect of application of red LED on the dermis of rats

Diodos Emisores de la Luz- Light Emitting Diodes (LED) son fuentes de luz que están siendo introducidos en los tratamientos del envejecimiento. El objetivo del estudio fue evaluar los efectos del LED rojo en la dermis de ratones wistar. Se trata de un estudio experimental controlado y randomizado, fueron utilizados 20 ratones wistar divididos en cinco grupos. Los grupos fueron: G1 en donde se aplicó 10 sesiones de diez minutos de fototerapia por LED. El G2 con 20 sesiones de 10minutos, el G3 con 10 sesiones de 20 minutos, el G4 con 20 sesiones de 20 minutos y el G5 fue el grupo control. Después de las aplicaciones se recolectó el material biológico de la zona, siendo realizado el análisis histológico de las áreas que recibieron las aplicaciones, sometiéndolas a las coloraciones de HE, tricómico de Masson y Verhoeef. Fue observada la presencia de micro vasos dérmicos con resultados significativos entre el G2 y el G5. Con relación a la presencia de mastocitos hubo resultados significativos entre el G1 y el G3. El análisis de las fibras elásticas presentó resultados significativos en los grupos G1, G2, G3, G4 en comparación al grupo control (G5). La evaluación de los efectos del LED en las fibras colágenos, los grupos tratados comparados al grupo control no presentaron ninguna diferencia significativa.

The Light-Emitting Diodes Light Emitting Diodes (LED) are a source of light wich are being introduced into the treatment of aging process. This study evaluate the effect of application of red LED on the dermis of Wistar rats. Twenty Wistar rats were used in this randomized controlled experimental study. Those rats were divided randomly into five groups. The G1 group underwent ten sessions of phototherapy by LED lasting ten minutes each. The G-2, 20 sessions of 10 minutes, the G-3, 20 minutes, the fourth group, 20 sessions of 20 minutes and the G-5 group was the control group. After the application, the biological material was collected and the histological analysis of the areas that suffered application were done, being subjected to HE staining, and Masson trichrome & Verhoeff. It was observed the presence of dermal microvascular, with significant results among G2 and G5 groups. Regarding the presence of mast cells, significant results were observed among G1 and G3 groups, however, that was not the case with the G5. By analyzing the elastic fibers, significant results were observed among G1, G2, G3, G4 groups, but the same results weren’t observed in the fifth group. Regarding the assessment of the effects of LED on the collagen fibers, the treated groups, when compared to the control group, showed no significant difference.

Detection of pathogenic mutations in Marfan syndrome by targeted next-generation semiconductor sequencing / 中华医学遗传学杂志

<p><b>OBJECTIVE</b>To detect pathogenic mutations in Marfan syndrome (MFS) using an Ion Torrent Personal Genome Machine (PGM) and to validate the result of targeted next-generation semiconductor sequencing for the diagnosis of genetic disorders.</p><p><b>METHODS</b>Peripheral blood samples were collected from three MFS patients and a normal control with informed consent. Genomic DNA was isolated by standard method and then subjected to targeted sequencing using an Ion Ampliseq(TM) Inherited Disease Panel. Three multiplex PCR reactions were carried out to amplify the coding exons of 328 genes including FBN1, TGFBR1 and TGFBR2. DNA fragments from different samples were ligated with barcoded sequencing adaptors. Template preparation and emulsion PCR, and Ion Sphere Particles enrichment were carried out using an Ion One Touch system. The ion sphere particles were sequenced on a 318 chip using the PGM platform. Data from the PGM runs were processed using an Ion Torrent Suite 3.2 software to generate sequence reads. After sequence alignment and extraction of SNPs and indels, all the variants were filtered against dbSNP137. DNA sequences were visualized with an Integrated Genomics Viewer. The most likely disease-causing variants were analyzed by Sanger sequencing.</p><p><b>RESULTS</b>The PGM sequencing has yielded an output of 855.80 Mb, with a > 100 × median sequencing depth and a coverage of > 98% for the targeted regions in all the four samples. After data analysis and database filtering, one known missense mutation (p.E1811K) and two novel premature termination mutations (p.E2264X and p.L871FfsX23) in the FBN1 gene were identified in the three MFS patients. All mutations were verified by conventional Sanger sequencing.</p><p><b>CONCLUSION</b>Pathogenic FBN1 mutations have been identified in all patients with MFS, indicating that the targeted next-generation sequencing on the PGM sequencers can be applied for accurate and high-throughput testing of genetic disorders.</p>

Assessment of Arsenic Exposure by Measurement of Urinary Speciated Inorganic Arsenic Metabolites in Workers in a Semiconductor Manufacturing Plant

OBJECTIVES: The purpose of this study was to evaluate the exposure to arsenic in preventive maintenance (PM) engineers in a semiconductor industry by detecting speciated inorganic arsenic metabolites in the urine. METHODS: The exposed group included 8 PM engineers from the clean process area and 13 PM engineers from the ion implantation process area; the non-exposed group consisted of 14 office workers from another company who were not occupationally exposed to arsenic. A spot urine specimen was collected from each participant for the detection and measurement of speciated inorganic arsenic metabolites. Metabolites were separated by high performance liquid chromatography-inductively coupled plasma spectrometry-mass spectrometry. RESULTS: Urinary arsenic metabolite concentrations were 1.73 g/L, 0.76 g/L, 3.45 g/L, 43.65 g/L, and 51.32 g/L for trivalent arsenic (As3+), pentavalent arsenic (As5+), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), and total inorganic arsenic metabolites (As3+ + As5+ + MMA + DMA), respectively, in clean process PM engineers. In ion implantation process PM engineers, the concentrations were 1.74 g/L, 0.39 g/L, 3.08 g/L, 23.17 g/L, 28.92 g/L for As3+, As5+, MMA, DMA, and total inorganic arsenic metabolites, respectively. Levels of urinary As3+, As5+, MMA, and total inorganic arsenic metabolites in clean process PM engineers were significantly higher than that in the non-exposed group. Urinary As3+ and As5+ levels in ion implantation process PM engineers were significantly higher than that in non-exposed group. CONCLUSION: Levels of urinary arsenic metabolites in PM engineers from the clean process and ion implantation process areas were higher than that in office workers. For a complete assessment of arsenic exposure in the semiconductor industry, further studies are needed.

Aplicações do laser diodo na Ortodontia - relatos de caso / Diode laser in Orthodontics - case report

Este artigo tem a finalidade de demonstrar, através do relato de casos clínicos, as indicações do laser de diodo de alta intensidade na Ortodontia. A literatura sugere que esse laser pode ser utilizado em cirurgias periodontais de tecido mole, como gengivectomias e gengivoplastias e, também na obtenção da microestética associada aos tratamentos ortodônticos. As vantagens da utilização desse laser são baixo custo em relação aos outros lasers de alta intensidade, portabilidade do aparelho, redução do sangramento e do tempo operatório, menor formação de cicatriz e redução bacteriana. Conclui-se que o laser de diodo de alta intensidade é indicado como coadjuvante no tratamento ortodôntico

The purpose of this article is to demonstrate, through the presentation of clinical cases, the indication of high power diode laser in Orthodontics. Literature suggests that this laser can be used in soft tissue surgeries such as gingivectomies, gingivoplasties, and also in the achievement of microesthetics associated to orthodontic treatment. The advantages of the diode laser are low cost related to other high power lasers, portable device, lack of bleeding and less surgical time, less scar tissue formation and bacterial reduction. It was concluded that high power diode laser can be indicated as a helpful device in orthodontic treatment

Much Concern but Little Research on Semiconductor Occupational Health Issues

No abstract available.

Occupational Neurotoxic Diseases in Taiwan

Occupational neurotoxic diseases have become increasingly common in Taiwan due to industrialization. Over the past 40 years, Taiwan has transformed from an agricultural society to an industrial society. The most common neurotoxic diseases also changed from organophosphate poisoning to heavy metal intoxication, and then to organic solvent and semiconductor agent poisoning. The nervous system is particularly vulnerable to toxic agents because of its high metabolic rate. Neurological manifestations may be transient or permanent, and may range from cognitive dysfunction, cerebellar ataxia, Parkinsonism, sensorimotor neuropathy and autonomic dysfunction to neuromuscular junction disorders. This study attempts to provide a review of the major outbreaks of occupational neurotoxins from 1968 to 2012. A total of 16 occupational neurotoxins, including organophosphates, toxic gases, heavy metals, organic solvents, and other toxic chemicals, were reviewed. Peer-reviewed articles related to the electrophysiology, neuroimaging, treatment and long-term follow up of these neurotoxic diseases were also obtained. The heavy metals involved consisted of lead, manganese, organic tin, mercury, arsenic, and thallium. The organic solvents included n-hexane, toluene, mixed solvents and carbon disulfide. Toxic gases such as carbon monoxide, and hydrogen sulfide were also included, along with toxic chemicals including polychlorinated biphenyls, tetramethylammonium hydroxide, organophosphates, and dimethylamine borane. In addition we attempted to correlate these events to the timeline of industrial development in Taiwan. By researching this topic, the hope is that it may help other developing countries to improve industrial hygiene and promote occupational safety and health care during the process of industrialization.